Vented Dipstick - Polished (Each)-07100259

Description

Vented Dipstick – PolishedVented DipstickBillet dipsticks vent/breathe excessive crank case pressure from the oil tank through a PCV style breather, consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valveScrews into the factory oil fill spout as a stock replacement partBlowby is pressure that is forced past the rings and cylinders, pushed into the crankcase and then forced into the oil tankFueling test results show a decrease in engine oil sump levels, more freely/smoothe revving engine and increased MPG and decreased blowbyRemoves unwanted build-up of blow by pressure in the oil tankThere are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) Full Hot Stand or the bike upright and level (FHU) Full Hot UprightThis dipstick does get hot, use a glove when checking oil levelIncludes 2 different venting style options for installing the dipstick: option 1 – 1/8 NPT breather vent fitting with internal porous filter element, option 2 – quick disconnect coupler fitting with rubber hose and filter elementIt is important to get the correct hot oil level in your bike. Feuling recommends running the oil level 90%-99% full when hotThe oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tankMade in the U.S.A.This part is not authorized to be shipped to CALIFORNIA.Fitment: